現在的木工加工棚是每個建筑施工的地方的必備品，在施工現場保護工人的，但是大家了解木工加工棚制作工藝么？廠家給大家具體介紹一下。

Now the woodworking shed is a necessary item in every building construction area, and it protects the safety of workers at the construction site. But do you know the woodworking shed production process? The manufacturer gave you a detailed introduction.

1、現場鋼筋制作、木工加工、空壓機、小型機械機具等應設置木工加工棚。

1. Woodworking shed shall be set for on-site reinforcement fabrication, woodworking, air compressor, small machinery and tools, etc.

2、棚體高度與寬度應滿足作業需求。棚立柱采用埋地或螺栓錨地等方式固定牢固。

2. The height and width of the shed shall meet the operation requirements. The shed column shall be firmly fixed by means of burial or bolt anchorage.

3、棚體應用龍骨加強或四周纜風拉結等方式，保證在臺風等災害性氣候下有足夠的強度、使用。

3. The shed shall be strengthened by keel or tied by cable wind around to ensure sufficient strength and safe use in typhoon and other disastrous climates.

4、棚體頂面懸掛警示標語，棚內懸掛操作規程等標牌。

4. Safety warning slogans shall be hung on the roof of the shed, and signs such as safety operation procedures shall be hung inside the shed.

5、棚內應設置專用牌板，用以掛放特種作業人員作業證復印件、技術交底等資料;應設置專用箱柜，用以存放作業人員的勞動防護、作業工器具等物品。

5. Special signboards shall be set in the shed to hang copies of work permits, technical disclosure and other materials of special operators; Special boxes and cabinets shall be set up to store the labor protection, operation tools and instruments of operators.

6、棚體處于高空墜物半徑內或處于起重機臂桿回轉范圍之內時，棚頂采用雙層5cm厚木板鋪頂防護，上下兩層間隔0.6m。

6. When the shed is within the radius of falling objects or within the slewing range of the crane boom, the roof of the shed shall be covered with double-layer 5cm thick wooden boards, with an interval of 0.6m between the upper and lower layers.

7、強噪設備木工加工棚應采取封閉、加裝隔音板等措施進行降噪，強光設備應設置防光污染措施。

7. The woodworking shed for strong noise equipment shall be closed and equipped with sound insulation boards to reduce noise, and the strong light equipment shall be provided with light pollution prevention measures.

8、地鐵施工一般場地狹小，困難時可根據情況采用雙層棚、推拉式棚、或結合使用。搭建應進行專項設計，保證棚體有足夠強度。

8. Generally, the subway construction site is narrow, and double decked shed, push-pull shed, or combination can be used according to the situation when it is difficult. Special design shall be carried out for erection to ensure adequate strength of the shed.

雖然木工加工棚在施工場所一定程度可以保護，但是還是需要工資人員自身多多注意，希望我們的介紹能對大家有所幫助，有需要木工加工棚的企業可以聯系我們http://www.yibao68.com!

Although the woodworking shed can protect the safety of the construction site to a certain extent, the wage staff should pay more attention to it. I hope our introduction can help you. Enterprises that need woodworking sheds can contact us http://www.yibao68.com !